Lens Diaries Go Now
Glamour, Beauty, Nude, Models, Photographers

*    |  Register  


 
Go Back   Garage Glamour™ > Garage Glamour™ Main Forums > Main Community Forum
 

Main Community Forum General Modeling & Photography Forum
Adult posts prohibited!>>Please Read Our GUIDELINES before posting!

Reply
 
LinkBack Thread Tools Display Modes
Stripper Pole! HELP!!
Old 12-30-2005, 11:54 AM   #1 (permalink)
Fantasiesimage
Guest
 
Member GG#:
Posts: n/a
Comments:

IP: 68.103.164.252
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

It has been suggested to me buy a few of my models that I need a stripper pole for a prop in my studio!! anyone have any ideas on making one??? on the cheap!

Don.

 
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 12:03 PM   #2 (permalink)
Lifetime Photographer

 
ra35digital's Avatar
 
Join Date: Dec 2004
Member GG#: 40823
Location: Olympia
Posts: 28
Comments: 0

ra35digital is offline IP: 67.183.190.165
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Don-
Try this for a starter.
http://www.platinumstages.com/ or, if you are feeling industious, you can buy the needed metal work from a salvage yard. I've seen that done for use in a certain poker room. [img]/ubbthreads/images/graemlins/crazy.gif[/img]

R.A.
  View Public Profile Send a private message to ra35digital Find More Posts by ra35digital
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 12:51 PM   #3 (permalink)
Senior Bad Girl
 
Join Date: Feb 2004
Member GG#: 38071
Location: Denverish
Posts: 323
Comments: 0

Brattitude is offline IP: 67.177.194.150
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

http://www.stripperpole.com/
  View Public Profile Send a private message to Brattitude Find More Posts by Brattitude
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 02:02 PM   #4 (permalink)
Free Member
 
Join Date: May 2005
Member GG#: 43784
Posts: 107
Comments: 0

tmshots is offline IP: 24.22.50.66
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

http://www.officiallyfawnia.com/index.php Not to mention instructional video and much much more. No this isnt a shameless Plug for myself of any kind. I worked with her and will work with her many times over!
  View Public Profile Send a private message to tmshots Visit tmshots's homepage! Find More Posts by tmshots
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 03:30 PM   #5 (permalink)
Free Member
 
Join Date: Nov 2002
Member GG#: 35402
Location: Little Rock
Posts: 192
Comments: 0

Gunfitr is offline IP: 162.40.140.233
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote



If you are willing to paint it black, look for the 2 inch pipe and end fittings at the hardware store.

They have the round adapters (end pieces) that screw onto the pipe and 4 bolts hold it to the floor and ceiling.

Mark
  View Public Profile Send a private message to Gunfitr Find More Posts by Gunfitr
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 03:35 PM   #6 (permalink)
Ed Peters

 
epeters's Avatar
 
Join Date: Jan 2004
Member GG#: 37945
Location: Lafayette
Posts: 302
Comments: 0

epeters is offline IP: 65.193.202.162
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

If they're not going to put any weight on it, a telescoping shower curtain rod might work?
  View Public Profile Send a private message to epeters Find More Posts by epeters
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 05:04 PM   #7 (permalink)
Free Member
 
Join Date: Aug 2004
Member GG#: 39608
Location: Hillsborough
Posts: 474
Comments: 0

hipchildreth is offline IP: 66.57.105.187
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Maybe 1-1/2" or 2" EMT conduit; it's smooth but I don't know how you would put a chrome-like shine on it. I'll sell you a Bogen Autopole cheap but you'll have to find a good way to get it to Wichita.

Chip
  View Public Profile Send a private message to hipchildreth Visit hipchildreth's homepage! Find More Posts by hipchildreth
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 05:08 PM   #8 (permalink)
Free Member
 
Join Date: Dec 2005
Member GG#: 48597
Location: Columbus, Ohio
Posts: 25
Comments: 0

imagemaker6 is offline IP: 68.250.178.186
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Don, I agree with Mark
2 inch pipe will work, not to expensive.
Just be sure to clean it well before painting.
It normally has a very light coating of oil
to inhibit rust.
Be sure to post some shot for us.
Good Luck

Steve
  View Public Profile Send a private message to imagemaker6 Visit imagemaker6's homepage! Find More Posts by imagemaker6
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 06:28 PM   #9 (permalink)
Lifetime Photographer

 
brew's Avatar
 
Join Date: Aug 2005
Member GG#: 45621
Location: Chicago
Posts: 64
Comments: 0

brew is offline IP: 24.15.115.141
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Chrome closet pole is available at most home improvement stores, for the portability option (keep in mind not weight bearing) you can clamp it to a cinder block or you can hang it so to speak from a backdrop stand or boom.

the pole itself is nice and cheap and available to 8'. im guessing you dont want to mount it to anything.. but you might come up with another way of mounting it lemme know..

Laters.....Eric
  View Public Profile Send a private message to brew Find More Posts by brew
 
Re: Stripper Pole! HELP!!
Old 12-30-2005, 06:31 PM   #10 (permalink)
Lifetime Photographer

 
rixafter6's Avatar
 
Join Date: Jan 1970
Member GG#: 37576
Location: Near Kansas City
Posts: 697
Comments: 0

rixafter6 is offline IP: 69.247.193.169
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Don:

Be very, very careful if you're going to do it yourself. Those young ladies can put a lot of stress on the pole and you don't want it falling.

Black iron is cheap and the fittings are available at you local hardware store, but the outside is very rough. 1-1/2" conduit is good, as well as cheap, but doesn't come in brass.

Rick D.
  View Public Profile Send a private message to rixafter6 Visit rixafter6's homepage! Find More Posts by rixafter6
 
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
So, I bought a stripper pole... DDCStudios Main Community Forum 22 11-20-2008 11:02 AM
A little help with pole dancing JimK Tech Talk Forum 5 04-19-2008 10:40 AM
Pole Dancing? mssmison Main Community Forum 15 08-05-2007 06:26 AM
More Tracy - Stripper Pole Jason407 Main Community Forum 9 10-23-2006 02:36 PM
Praising the pole dancers rixafter6 Main Community Forum 53 10-20-2005 12:23 AM

Sponsors


New To Site? Need Help? Photographer & Model Links
All times are GMT -5. The time now is 12:15 AM.

© 1999-2017 Garage Glamour™




Search Engine Friendly URLs by vBSEO 3.2.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94