Quote:
Originally Posted by otwpix
It seems that when I shoot with my studio strobes that I am always at f11 or higher. Is there ever a problem with the hensel lights that you have too much light. Is 500 watt/seconds too much? or is this just not a factor because you can turn them down?
|
The Integra Pro plus monolights have a 6 stop range, so they will step down to 17 w/s. That should give you plenty of flexibility to set just about whatever f-stop you want.
Quote:
Originally Posted by otwpix
Also can you purchase battery packs for the pro plus so they are portable?
|
The Hensel monolights, like most monolights, are AC-only. If you want to run them off of a battery, you could purchase something like a 1500 W pure sine wave inverter and connect it to a car battery. Or you could take a look at the Dynalite XP1100 power inverter that I mentioned in an earlier post in this thread. It will power up to 1000 w/s of strobes for ~200 full power flashes, so you could run (2) 500 w/s monolights off of it.
-Chip